You are an anonymous user. You can register for free by clicking here
Member Login info for RDDreams Forum
YOU ARE NOT LOGGED IN. YOU WILL BE UNABLE TO ACCESS THE BEST RDDREAMS FORUMS UNLESS YOU REGISTER AND LOGIN!GUESTS ONLY GET TO VIEW A TINY FRACTION OF THE ACTIVE FORUMS
The Forums are the heart and soul of this community. If you haven't signed up already, we strongly recommend you to. It is free! (for now)
People often wonder. Whats up with this bunch of weirdos who go on and on about their bikes cars and engines. Well we worship a special God. The God of Speed. And we have our own saints people like Briten & Burt Munro.
If your a port grinder then you will have in your arcenel at least one hand pice that can handle a 3-4mm shank bit.
Or worst case even a dremel. In which case you would have surelly suffered like I have over the years with Mandrels. For some reason Ive never had much luck with the Dremel or other Mandrels. They never seem last for more than one pair of barrels. They seem at best very flimsy and any thing heaver than a cut off wheel will mean you need a new mandrel. Esp. when mounting the slightlly larger round stones.
Werther your a tuner or a cosmetics guy. Contours are everything.
If your like me you've probably spent hundreds of hours cutting different kinds of heads. On paper its easy you do the math get your MSV numbers and cut your head. But every now and then you will cut a head that turns out so good even you cant figure out what it was. How do you repeat the superb and avoid the bad ones. How do you provide consistent results to your customers.
How do you change the cut of your head based on the piston your running.
How does the Dome of a Wiseco piston differ from the dome of a Pro-X piston.
How do you make sure you have an even gap between the dome of the piston and the new head you have cut.
How do you contour that fiberglass mould to make sure the curvature on both sides is the same.
Ron seems to have fixed the php safe mode issue on the server. Hence, we have reverted back to the good old gallery module that we were using. I have made some small tweaks... hope it works fine... Click "The Photo Gallery" link from the main menu on the left.
Some good news.
The results are coming in from around the world. And different cities in India.
Will let the numbers speak for them selfs.
First scan is after RDD. Second scan is before RDD img>
The big boy from the world of biking is revving on the passage to India. America’s cult bike brand Harley Davidson is exploring the opportunity of riding into the burgeoning Indian motorcycle market through the direct import route.
Harley Davidson is in the process of assessing the feasibility of entering the Indian market with its range of high-end performance bikes.
A lot of new members who signup. Dont seem to get past the first page of this comunity. Please note to read posts, ask questions and enter the site you need to CLICK HERE Or chose the option RDD Forums its the first link under sections.
Ok how many of you are particular about the brand of gas you buy. Do you know how to spot the good pumps and companies from the bad.
Heres a little gem Ive been using for many years.
members: 15435
guests online: 97
members online: 72
You are an anonymous user. You can register for free by clicking 
img>
